Last updated: October 2026 · Written by the LawnVibe editorial team.
A trimmer line size chart helps you match the right diameter to your string trimmer. In short: .065 inch line suits light electric and small battery trimmers, .080 inch fits many battery and light gas trimmers, .095 inch is the most common size for mid-size gas and powerful battery trimmers, and .105 inch and thicker are for heavy-duty gas trimmers and brush cutters. The right size is always the one your trimmer's manual specifies, because using thicker line than the head and engine are designed for causes strain and overheating.
This guide is based on manufacturer specifications and general equipment guidance; the string trimmer article on Wikipedia covers how these tools developed. For specific line recommendations, see our guide to the best string trimmer line.
Quick Answer
A trimmer line size chart helps you match the right diameter to your string trimmer. In short: . 065 inch line suits light electric and small battery trimmers, .
Key takeaways:
- Match your line to the diameter in your manual: .
- 065 for light electric trimmers, .
- 080 for many battery and light gas trimmers, .
- 095 for most gas trimmers and .
Trimmer Line Size Chart
| Diameter (inches) | Approx. mm | Typical Trimmers | Typical Use |
|---|---|---|---|
| .065 | 1.65 | Corded electric, light battery | Light grass, small yards |
| .080 | 2.0 | Many battery, light gas | Regular lawn trimming |
| .095 | 2.4 | Most homeowner gas, powerful battery | Grass and weeds |
| .105 | 2.7 | Heavy-duty gas | Thick weeds |
| .130 | 3.3 | Pro gas, brush cutters | Heavy growth |
| .155 | 3.9 | Commercial brush cutters | Brush and tough weeds |
Metric figures are approximate conversions. Ranges overlap between brands and models.
How to Find Your Trimmer's Line Size
Check the owner's manual first; it lists the recommended diameter or range. Many trimmer heads are stamped or labeled with the maximum line size. You can also look up the trimmer model on the manufacturer's website. If you have the old spool or packaging, the diameter is usually printed on it. As a last resort, measure existing line with calipers.
Why Line Size Matters
Line diameter affects cutting power, durability, head speed and load on the motor or engine. Thicker line is stronger and cuts heavier vegetation, but it adds weight and air resistance, slowing the head. A trimmer designed for .080 line may struggle and overheat with .095. Thinner line spins faster with less load but breaks more easily in tough weeds.
.065 Trimmer Line
The thinnest common size, .065 is used on corded electric trimmers and small battery trimmers. It is ideal for light grass trimming around small yards, patios and beds. It breaks quickly on weeds and hard edges, so expect to feed line more often.
.080 Trimmer Line
A very common size for battery trimmers and lighter gas trimmers. It balances durability and low drag, which helps battery runtime. It handles regular lawn trimming and moderate weeds.
.095 Trimmer Line
The most popular size for homeowner gas trimmers and many powerful battery models. It handles grass and most weeds, lasts longer than thinner line and is widely available in many shapes. If your trimmer accepts .095, it is a good default.
.105 Trimmer Line and Thicker
Heavy-duty gas trimmers and brush cutters use .105, .130 or .155 line for thick weeds, overgrown fields and light brush. These sizes need powerful engines and heads rated for them.
Line Size and Battery Trimmers
Battery trimmers are sensitive to load. Using the lightest line that does the job helps maximize runtime and protects the motor. Many manufacturers specify .080 for their mainstream battery trimmers, while high-voltage models may accept .095. Follow the manual.
Line Size and Trimmer Heads
The head's eyelets limit the maximum diameter, and the spool capacity determines how much line fits. Thicker line holds less length on the spool. Some heads accept a range, such as .080 to .095; others specify a single size. If you upgrade to an aftermarket head, check its supported range. See how to replace the line on a trimmer for loading steps.
What Happens If You Use the Wrong Size?
Line that is too thick can cause the trimmer to bog down, overheat, wear the clutch or motor faster and fail to feed through the eyelets. Line that is too thin breaks constantly, wastes time and may weld together inside the spool from heat. Both reduce cutting performance.
How Much Line to Load
Most manuals list a specific length to wind for each diameter, often in the range of 10 to 25 feet depending on the head and line size. Overfilling the spool causes jams and poor feeding; underfilling means more frequent reloads. Our guide on how to wind trimmer line on a spool explains the process.
Choosing Line Size by Yard and Vegetation
| Situation | Suggested Size (if trimmer allows) |
|---|---|
| Small lawn, light grass, around patios | .065 to .080 |
| Typical suburban lawn with edges | .080 to .095 |
| Weeds along fences and ditches | .095 |
| Overgrown lots and thick weeds | .105 and up |
| Light brush and tall field grass | .130 and up on brush cutters |
Always stay within your trimmer's specified range, even if your vegetation suggests a thicker line.
How Line Shape Interacts With Size
The same diameter can perform differently depending on shape. A .080 square line cuts thick weeds better than a .080 round line, while a .095 round line may last longer against concrete than a .095 star line. If your trimmer is limited to thinner line, a shaped profile can add cutting power without increasing diameter. Twisted lines reduce noise and drag, which helps battery trimmers.
Measuring Line Accurately
Digital or dial calipers give the most accurate measurement. Measure round line across its diameter. For square or star line, measure across the widest points as manufacturers typically do. Without calipers, compare against a new length of known size. Small differences matter: .080 and .095 differ by only fifteen thousandths of an inch, but the extra mass is significant at high speed.
Converting Metric Trimmer Line Sizes
Many European and global brands list line in millimeters. Use these approximate conversions: 1.6 mm is about .065 inch, 2.0 mm about .080, 2.4 mm about .095, 2.7 mm about .105, 3.0 mm about .118, 3.3 mm about .130 and 4.0 mm about .155. When a trimmer lists 2.4 mm, a .095 line is the equivalent.
How Much Line Is in a Spool?
Spools are sold by length or by weight. Thicker line gives fewer feet per pound, so a 1 lb spool of .065 contains much more length than a 1 lb spool of .105. Compare packages by length and diameter rather than weight alone. Larger spools usually lower the cost per foot.
Pre-Cut Lengths and Fixed-Line Heads
Fixed-line heads use pre-cut pieces of a specific length and diameter, often thicker than bump-feed heads allow. Pre-cut packs are convenient, especially for commercial users who reload often. Check the head instructions for length and diameter.
Homeowner vs Commercial Sizes
Most homeowners use .065 to .095. Commercial landscapers often run .095 to .105 on professional trimmers for durability and productivity, and brush cutters may use .130 or thicker. Commercial-grade lines may also use tougher copolymers or reinforced cores.
Signs You Need a Different Size
If line breaks after only a few minutes in normal grass, the line may be too thin or old. If the trimmer bogs down, overheats or the line will not feed, it may be too thick. If you constantly cut thick weeds and your trimmer allows it, stepping up one size can reduce breakage.
Quick Reference Checklist
Find the size in your manual or on the head. Choose the shape for your conditions. Buy fresh line from a reputable seller. Wind the length specified for your head. Store extra line in a cool, dark place. Recheck the manual if you change trimmer heads.
Safety Reminder
Regardless of size, wear eye protection, hearing protection, long pants and sturdy shoes, and keep bystanders away. Never replace line with wire, chain or metal cable, which can be thrown with dangerous force.
Line Size for Popular Trimmer Categories
Corded electric trimmers commonly specify .065 line because their motors and heads are designed for light trimming. Entry-level battery trimmers in the lower voltage classes often use .065 or .080. Mid-range and higher-voltage battery trimmers frequently use .080 or .095, and some premium models accept .095 to .105 with optional heads. Homeowner gas trimmers in the 25cc to 30cc range commonly take .080 to .095, while larger professional gas trimmers often run .095 to .105 or more. These are typical patterns only; your manual is the authority.
Line Size and Cutting Swath
Changing line diameter does not change the cutting width, which is set by how far the line extends from the head, usually limited by a cutoff blade on the guard. Thicker line holds its length better in dense growth, so the effective swath stays consistent, while thin line may break shorter and narrow the cut until you feed more line.
Line Size and Noise
Thicker line generally creates more air noise at high speed. If noise is a concern, use the thinnest line that handles your vegetation, or try twisted or specially profiled quiet lines in the correct diameter.
Does Line Size Affect Safety?
Thicker line throws debris with more force and can cause more damage to plants, trees and surfaces it contacts. Keep line away from tree trunks, where it can strip bark and harm the tree. Use guards as supplied and maintain safe distances from people, pets, windows and vehicles.
Upgrading to a Heavier-Duty Head
If you regularly need thicker line than your current head supports, some trimmers accept aftermarket heads designed for larger diameters. Only do this if the manufacturer confirms the engine and gearbox can handle it, since running heavier line on an underpowered trimmer shortens its life.
Buying the Right Size Online
When shopping online, double-check the listed diameter in the product title and description, confirm whether the size is in inches or millimeters and look at the spool length. Some listings show multiple sizes under one product page, so make sure the selected option matches your trimmer before ordering.
Keeping a Spare Spool on Hand
Running out of line halfway through a job is frustrating. Keep a spare pre-wound spool or a few pre-cut lengths in the correct size with your trimmer. Label the storage bag with the diameter so you never grab the wrong size, especially if you own more than one trimmer that uses different line.
When to Ask a Dealer
If your manual is missing and the model number is worn off, a local outdoor power equipment dealer can usually identify the trimmer and its correct line size in minutes.
Trimmer Line in Popular Sizes
These lines cover the most common diameters. Details come from Amazon listings; confirm the size against your manual. We have not hands-on tested them.
MaxPower Residential Round .065 Trimmer Line, 260 ft
Best for: Corded and light battery trimmers
A residential-grade round .065 line for light trimmers.
- Light load on small motors
- Round profile is durable
- Too thin for heavy weeds
MaxPower .080 Premium Twisted Trimmer Line, 280 ft
Best for: Cordless trimmers that use .080 line
A thinner twisted line made in the USA, suited to trimmers that specify .080 line.
- Light line saves battery power
- Twisted profile is quieter
- Too thin for heavy weeds
Oregon Gatorline .095-Inch Square Trimmer Line, 1134 ft
Best for: Gas trimmers and mixed weeds
Square-profile .095 line that Oregon says slices vegetation with a clean, even pass, in a large spool for frequent use.
- Square edges cut cleanly
- Large spool
- Fits standard .095 heads
- Square line can be harder to wind on some heads
Husqvarna Titanium Force .095 Trimmer Line, 840 ft
Best for: Everyday trimming with fewer breaks
A round, dimpled, co-extruded commercial-grade line designed for durability and energy efficiency.
- Durable co-extruded design
- Easy to wind
- Round profile cuts less sharply than square
Oregon Magnum Gatorline .105-Inch Square Trimmer Line
Best for: Heavy weeds and overgrown areas
A thicker .105 square line for tough vegetation on trimmers rated for it.
- Thicker line for heavy growth
- Universal fit for .105 heads
- Only for trimmers rated for .105
Compare shapes and brands in our best string trimmer line guide.
Common Mistakes
Common mistakes include assuming thicker line is always better, buying the wrong size for a battery trimmer, overfilling the spool, ignoring the head's maximum diameter and mixing up metric and inch sizes.
Final Thoughts on the Trimmer Line Size Chart
Match your line to the diameter in your manual: .065 for light electric trimmers, .080 for many battery and light gas trimmers, .095 for most gas trimmers and .105 or thicker for heavy-duty equipment. Then choose a shape for your conditions using our best string trimmer line guide.
More Questions People Ask
Is .080 or .095 trimmer line better?
Neither is better in general. .095 is stronger for weeds on trimmers rated for it, while .080 reduces load and suits many battery trimmers.
What size line does a battery trimmer use?
It varies by model. Many mainstream battery models use .080, while some higher-power models use .095. Check the manual or trimmer head.
Can I put .105 line in my trimmer?
Only if the manual or head is rated for .105. Otherwise the engine or motor may be overloaded.
What does .095 mean on trimmer line?
It is the line diameter in inches: .095 inch, which is about 2.4 millimeters.
Frequently Asked Questions
What size trimmer line do I need?
Check your trimmer's manual or the label on the trimmer head. Many corded and light battery trimmers use .065 to .080, many gas trimmers use .080 to .095, and heavy-duty trimmers use .105 or larger.
Can I use .095 line in a .080 trimmer?
Generally not recommended. Thicker line can overload the motor or engine, reduce head speed, cause overheating and may not feed properly through eyelets.
Can I use thinner line than recommended?
It usually fits, but thinner line breaks more often and cuts less effectively in thick growth. Use the specified size for best results.
What is .095 trimmer line in millimeters?
.095 inches is approximately 2.4 mm. .080 is about 2.0 mm, .065 is about 1.65 mm and .105 is about 2.7 mm.
How do I measure trimmer line diameter?
Use calipers or compare against a known reference. You can also check the spool label or the trimmer's manual and head markings.






